My Nighthawk router was giving me issues. It was not working and allowing me to access Netgear admin login page. In addition to that, the router was not connecting with my internet modem and any of my client devices. So, I opted to reset it. Now, after resetting Nighthawk router, I found that it is not working. What do I suppose to do now? How can I make my device working again? Help!”
Need not to worry! We have got you covered! In this troubleshooting post, you will find some of the best fixes that will help you make your Nighthawk router working again. Let’s get started!
Nighthawk Router Not Working [Fixed]
With the help of the troubleshooting tips listed below, you can make your Nighthawk router up and running in a flash. Keep reading!
Update Firmware
You must try updating the firmware of your Nighthawk router to make it up and running. Chances are that the firmware of your router has got outdated which is why it has stopped working for you. So, without thinking much, so refer to the highlighted term and know how to update Nighthawk router firmware.
The instructions to update firmware will be applicable for all Nighthawk router’s model. So, don’t scroll away if you see the instructions to update the router’s firmware for a particular router model upon referring to the highlighted term.
Connect Nighthawk Router and Internet Modem
Perhaps your Nighthawk router and internet modem are not connected. If so, then you need to make them connected as soon as possible. Note this down, no connection between your router and modem will not let your Nighthawk device perform in a proper manner. So, make your devices connected and get ready to make the most out of your Nighthawk device in a snap.
How to connect Nighthawk router and internet modem?
There are two methods to make a connection between your Nighthawk router and internet modem:
- Wired Method
- Wireless Method
In wired method, there is a need of an Ethernet cable. Once you have it, connect its one end in to your Nighthawk router and other end in to your internet modem.
In wireless method, there is a need to maintain a safe distance between your router and internet modem. Once you have maintained it, press the WPS button on your router and then on your modem.
Remember that, not every modem is WPS-capable. If your modem is not WPS-capable either, then use the wired method for making a connection between your devices.
Change Nighthawk Router Location
The placement of your Nighthawk router plays a very vital role in its well-performance and smooth working. So, without delay, change the location of your Nighthawk router right away. But, you must not place the router away from the reach of your internet modem.
In addition to that, we suggest you – do not place your router and modem in corner, lower surface, inside cabinet and so on.
Now, try to login to Nighthawk router to see if the above-mentioned fixes help you in making your device (router) up and running.
Restart Your Nighthawk Router
Still no luck? If yes, then you must give your Nighthawk router a fresh start.
To restart your router, here’s what you can do:
- Disconnect your router and internet modem.
- Turn off your Nighthawk device.
- Keep the device turned off for 5-10 minutes.
- Now, turned the Nighthawk device back on.
- Upon turning the Nighthawk router back on, the LEDs on it will start blinking. As soon as it becomes stable, you can use it the way you want and start making the most out of its internet connection.
Reset and Reconfigure Nighthawk Router
On the off chance, the restarting process doesn’t help you either, then resetting is the only option you are left with. It seems like the Nighthawk router setup process is not performed in a proper way which is why it is not working for you. So, take the plunge to reset the device and then configure it from scratch by accessing Netgear Nighthawk router login page and following the on-screen instructions.
In the end, can we hope that the troubleshooting tips we have outlined above will help you fix Netgear Nighthawk router not working issue.
